PR releases

CAP-XX Demonstrates Surface Mountable Supercapacitors - meets industry requests for supercapacitors capable of mass assembly

by Staff Writer | posted on 20 June 2009


Sydney, Australia – June 15, 2009 – CAP-XX Limited (LSE:CPX), developer of thin-form supercapacitors which deliver burst and back-up power in space-constrained electronic devices, has demonstrated prototypes of surface-mountable supercapacitors at its Lane Cove manufacturing facility in Australia. The company developed the SMT (surface-mount technology) devices to meet customer requests for supercapacitors capable of mass production assembly using standard reflow soldering techniques.

CAP-XX engineers sent several working prototypes of the SMT supercapacitors though a reflow oven at 260 degrees C. Before reflow, the thin, prismatic prototypes had ESRs (equivalent-series resistance) of 60 and 100 milliohms, capacitances of 1.0 and 0.5 Farads, and voltage ratings of 2.75 and 5.5V, respectively. The process had only minimal impact on performance, changing the ESR and capacitance by less than 10%.

"A high-power, surface-mountable supercapacitor with the CAP-XX characteristics of a thin, small form factor has been the holy grail for the portable electronics industry, particularly mobile handsets," said Anthony Kongats, CAP-XX CEO. "The preservation of performance demonstrated in this trial meets the requirements of these customer groups."

CAP-XX is developing SMT devices to facilitate the adoption of supercapacitor-enabled power architectures in high-end feature phones and other consumer electronics devices. Current CAP-XX devices are manually soldered onto the PCB (printed-circuit board).

"Supercapacitors will soon become a key component in mobile computing products," said Craig Mathias, a principal with Farpoint Group, an advisory firm specializing in wireless networking and mobile computing. "A supercapacitor handles the large instantaneous power demands of flash photos, audio, video, and wireless transmissions, maximizing battery life and enabling the use of smaller batteries. Given ever-increasing demands on battery power from higher clock rates and greater functionality, the supercapacitor is about to take center stage in mobile-power applications."

Mathias continued, "CAP-XX's SMT capability is an impressive development from a leader in the supercapacitor space."

CAP-XX supercapacitors store charge on nanoporous carbon electrodes on aluminum foil, arranged in multiple layers and connected in parallel to minimize resistance and maximize capacitance. This packs the highest energy and power densities possible into thin (0.9 to 3.8mm), prismatic packages.

The company did not disclose expected availability for its SMT devices.

About CAP-XX:
Sydney, Australia-based CAP-XX is a world leader in thin, flat supercapacitors for space-constrained electronic devices. Supercapacitors resolve the performance limitations of batteries and other current-limited power supplies, and provide backup power if the primary power source fails.

CAP-XX supercapacitors enable manufacturers to make smaller, thinner, longer-running and more feature-rich devices such as camera phones, solid state drives, handheld PCs and battery-free condition monitoring systems using the company's BritePower™ architectures. The company is listed on the Alternative Investment Market (AIM) in London.

For more information, visit http://www.cap-xx.com


Technorati tags:   
The Official Line - You can discuss this article on our discussion board.